Plan-it Play See Saw Hardware Kit:
Specifications:
Two assembled handle blocks with bar (available in redwood or pine)
Sturdy construction, 4x6x8 main beam with 4×4 legs
All hardware included (zinc-plated)
3D illustrated step-by-step manual
*Lumber Not Inlcuded
Soften the landing zones with a pair of Rubber Mats , made from dyed rubber chips, heat compressed and cut to 2’x2’x1″, available in dark green or brick red.
Lumber Needed to be Purchased:
1) 4″ x 6″ x 8′
2) 4″ x 4″ x 8′
1) 2″ x 6″ x 8′
1) 2″ x 4″ x 8′
Required Tools
•Circular saw
•Electric drill w/ philips head bit
•1 ¼” spade bit
•7/16″ standard drill bit
•5/8″ standard drill bit (6’x 6′ forts)
•Socket wrench w/ 9/16″ deep socket
•Hammer
•Vise grips
•Tape measure
•Combination square
•Extension cord
•Pencil
•Level
Safety, Finishing and Optional Tools
•Electric impact wrench w/ 9/16″ deep socket
•Hand sander
•Router w/ round over bit
•Stain/waterproof sealer
•Saw horses
•Safety glasses
•Work gloves
•Dust Mask
**FOR RESIDENTIAL USE ONLY**